Is your AC not turning on, running constantly, or blowing warm air?
You might have a tripped circuit breaker, dirty air filter, or low refrigerant levels. Ice formation and strange noises suggest dirty coils or loose parts. Water leaks can result from clogged condensate drains or improper installation. These issues contribute to high energy bills too. You can try some basic troubleshooting like checking the temperature settings and cleaning filters.
Keep reading to learn more about diagnosing and fixing common AC problems.
AC Not Turning On
![](https://langlerair.com.au/wp-content/uploads/2024/07/AC-Not-Turning-On-1024x538.png)
If you’re faced with the dreaded scenario of an air conditioner that won’t turn on, especially when you need it most during sweltering summer days or cold winters, there are a few simple things you can check to troubleshoot the issue.
- Start by inspecting your circuit breaker box and look for the switch labelled ‘AC’. If it’s tripped, flip it back to the ‘on’ position.
- Take a look at your temperature settings. Make sure it’s set to ‘cool’ and the desired temperature is lower than the current room temperature.
If these steps don’t do the trick, there might be a more serious problem at hand, such as faulty wiring. In this case, it’s best to call in a professional HVAC technician to diagnose and fix the issue safely. Attempting to tackle electrical problems without the proper expertise can be dangerous and may lead to further damage.
Constant Running or No Cool Air
If you’re not feeling the cool breeze you expect, the culprits may be clogged filters, low refrigerant levels, or a malfunctioning compressor.
To prevent these problems, you should perform regular maintenance, such as cleaning or replacing your filters every three months. This simple step can improve airflow and efficiency.
However, if basic troubleshooting doesn’t solve the issue, it’s time to call in a professional technician. They can diagnose and fix more complex problems, like refrigerant leaks or compressor failures, which require specialised tools and expertise.
Freezing Up and Strange Noises
![](https://langlerair.com.au/wp-content/uploads/2024/07/Freezing-Up-and-Strange-Noises-1024x538.png)
When you notice your air conditioner freezing up or making strange noises, it’s crucial to address these issues promptly to prevent further damage and maintain your system’s efficiency.
Ice formation on the AC unit or coils is a clear sign of freezing up, which can be caused by dirty coils, filters, or low refrigerant levels. To resolve this issue, you should clean the coils and filters regularly and have a technician check the refrigerant levels to guarantee proper functioning.
Strange noises like buzzing, rattling, or hissing can indicate loose parts, debris in the unit, or worn-out components. You can try tightening any loose screws and removing debris from the outdoor unit to alleviate these problems.
However, if the noises persist, it’s best to consult a professional for a thorough inspection. Ignoring these issues can lead to reduced system efficiency and shorter equipment lifespan, resulting in higher energy bills and potential breakdowns.
Water Leaks and High Energy Bills
![Water Leaks and High Energy Bills](https://langlerair.com.au/wp-content/uploads/2024/07/Water-Leaks-and-High-Energy-Bills-1024x538.png)
Two common air conditioning problems that can cause significant frustration and expense are water leaks and high energy bills.
If you notice water pooling around your AC unit, it could be due to a clogged condensate drain, improper installation, or a refrigerant leak. To address these issues, first, make certain that the condensate drain is clear of any blockages. Next, verify that the unit was installed correctly. If you suspect a refrigerant leak, it’s critical to have a professional technician diagnose and repair the problem.
High energy bills can also indicate underlying issues with your air conditioning system. Dirty filters, poor home insulation, or an inefficient AC unit may be the culprits behind increased costs. To reduce your energy bills, regularly clean or replace your air filters, and consider improving your home’s insulation. If your unit is old or inefficient, upgrading to a more energy-efficient model can lead to significant savings in the long run.
Air Conditioning Installation Perth – Langler Air
![Air Conditioning Installation Perth – Langler Air](https://langlerair.com.au/wp-content/uploads/2024/07/Air-Conditioning-Installation-Perth-Langler-Air-1024x538.png)
Here at Langler Air we offer reliable air conditioning installation in Perth. As a Mitsubishi Electric Diamond Dealer, we offer optimised and smart AC systems that maintain your ideal room temperature year-round.
Our Langler Air founder, Mike Spear, has overseen more than 10,000 air conditioning installations across Perth since the early 1990s. He’s built a team of exceptional, hand-picked professionals who’ve worked together for over a decade.
As an owner-operated business, we personally help property owners find, design, and install AC systems that deliver as promised. Our combined knowledge, skill, and training set our service apart.
When you choose Langler Air for your air conditioning installation in Perth, you can trust that you’re working with experts dedicated to your comfort. We’ll remove old or unserviceable units and replace them with reliable, energy-efficient systems tailored to your specific needs. With our extensive experience and commitment to quality, Langler Air guarantees that your home stays comfortable no matter the season.
Conclusion
You’re now armed with the knowledge to tackle common air conditioning problems head-on. By identifying the issue and following the troubleshooting tips, you can save time and money on repairs.
If the problem persists or you’re unsure about a solution, don’t hesitate to contact our team on 08 9228 3555.